How to get steel strapping back to life

July 30, 2019

Steel strap manual balers are new advanced pneumatic packaging machines for balers. It is mainly used for packing steel products and non-ferrous metals companies in the packaging of various small-sized pipes, plates, and profiles. It is also suitable for packing various products in wooden boxes. However, due to the loss of parts during use, the lubrication method does not play a very good effect, causing damage to parts and components, and may also increase the occurrence of faults and accidents. Therefore, it is very important to quickly find faults and rectify faults. It won't be asking for help from the manufacturer because of a minor glitch, which will win precious time and money.

Here are a few places that are prone to failure and maintenance methods.

Fault one: cut constantly steel strip.

Causes: 1) The cutter is worn or defective. ★ Maintenance method: Check whether the cutter or cutter holder is worn or faulty. Replace it if worn.

Reason: 2) Pressure drop. ★ Maintenance method: Check whether the working pressure is normal; cut off the steel belt force; check the blockade operation.

Fault 2: The tension of the lock jaw is not enough.

Cause: The clamping block coupling hole or coupling pin is worn. ★ Maintenance method: Check the parts when the depth of the groove is shallow and replace them if necessary.

Pro, I say this, do you understand? If you have any questions about the actual operation later, you can always consult me.

prossimo

Contattaci

Author:

Ms. Justina

E-mail:

sales@yalanpack.com

Phone/WhatsApp:

8618025199553