Classification of steel strapping

August 06, 2019

No-buckle steel strapping is generally suitable for flat packaging. For example, boxes, pallets, and other similar types of packaging. The buckle-free steel belt baler does not require the use of additional steel buckles; its characteristics are mainly that the average tensile strength of the no-buckle connection is about 80% of the tensile strength of the steel strip, is very reliable, and can save about 10% of the overall packaging cost . Universal steel tape packaging tools used in almost all areas are reliable, robust, easy to handle and lightweight, and are now widely used.

Manual steel strapping presses are known for their small size, ease of carrying, and durability. Widely used in various industries. It is used after the combination of an accelerator and a snap fastener. General specifications are 12mm, 16mm, 19mm, 25-32mm. And the gap between the friction wheel and the padding wheel is between 0.5-0.7mm, otherwise it should be adjusted, and the accumulated debris and dirt on the friction wheel should be promptly removed.

The difference between the pneumatic steel balers and the manual balers is that the former is equipped with a motor and should be filled with oil before use. It has certain requirements for air pressure, otherwise it will affect the packaging effect.

prossimo

Contattaci

Author:

Ms. Justina

E-mail:

sales@yalanpack.com

Phone/WhatsApp:

8618025199553